We develop, produce and apply devices for magnetic separation. Our magnetic separators are designed and manufactured exactly in a made-to-measure way as per your needs.
18. 4. 2024
Initial status
We were contacted by a salt producer with a request to design a metal detector. They were already using an older metal detector, but its sensitivity was completely...
11. 4. 2024
Initial status
A technical school was elaborating an analysis of incinerator ash for a waste incinerator company.
Problem
For laboratory testing purposes, a technical school...
4. 4. 2024
Initial status
We were dealing with a problem of magnetic separation in a company producing feed granules. Dried green fodder (alfalfa, clover) is processed into 8 mm granules...
21. 3. 2024
Initial status
In food production the final product is often contaminated with metal particles. A food manufacturer faced regular problems with the transfer of metal contaminants...
14. 3. 2024
Initial status
Our customer - an aluminum foundry – needed to separate residual aluminum pieces from foundry sand.
Problem
It is not possible to separate aluminum waste...
7. 3. 2024
Initial status
We were asked to design a magnetic filter for a company producing intravenously administered generic drugs and infusions. The glucose manufactured by the client...
29. 2. 2024
Initial status
In a foundry, handling scrap iron is a common activity. During this handling, scrap metal with sharp edges is scattered on the ground, creating a dangerous...
22. 2. 2024
Initial status
Our customer specializes in mining and processing of limestone. During this procedure the mineral gets contaminated with tramp metal (such as bolts, nuts,...
15. 2. 2024
Initial status
Our customer is a manufacturer of high-quality plastic extruders. He was looking for a reliable magnetic separation solution that was requested by one of his...
8. 2. 2024
Initial status
Our customer has been engaged in the production of resins and binders for more than 100 years. His product range includes hard and soft resins, polyurethane...
1. 2. 2024
Initial status
Our customer processes 0,3 – 0,8 mm steel sheets. The sheets are stacked - the height of the sheet stack is 300 mm. Sheets of 400 x 800 mm are most often...
25. 1. 2024
Initial status
Our customer has been specializing in recycling technical plastics and trading in secondary raw materials for more than 30 years. Thanks to our client's activities,...