Magnetic testing rod MTV

The stainless steel encased rare earth magnetic tube is designed for sampling products for ferromagnetic contamination, it is used at scrap yards & recycling centers for the inspection of the collected non-ferrous metals, at critical points throughout the production lines etc. The very strong neodymium NdFeB magnets inside of the sorting tube can also detect even the finest ferromagnetic particles in plastic materials (such as regranulates, crushed plastic materials, plastic crumb, rejected mouldings etc.).

The magnetic testing rod is light-weight, easy to handle and can be cleaned quickly and efficiently by realeasing the catch and sliding out the magnetic inner tube (which causes the magnetic contaminaton to fall away).

    A
(mm)
B
(mm)
C
(mm)
D
(mm)
MT01-20 Neodym NdFeB 400 160 78 22
MT01-30 Neodym NdFeB 400 160 78 32

The magnetic tubes are manufactured in diameters of 22 and 32 mm and in lengths of 360 and 1100 mm (the length of the active magnetic part is at both the versions 160 mm).

The telescopic magnetic rods find use e. g. in recycling and plastic industry.

Easy ordering at the e-shop

This product can be bought at our e-shop http://www.magnet-technology.com/katalog/en-i1103-magnetic-sorting-rod.html

 

 

Extra value added

Magnetic force (induction) generated by the extremely strong permanent magnets from rare earth ores does not let through any unwanted ferromagnetic impurities – and that is why the application options of our products are nearly unlimited (they find their use in chemical, plastic, automotive, building and pharmaceutical industries, food processing, mining etc.).

Our company goal is not only to manufacture and deliver a product, but above all to find and offer an exact solution satisfying the requirements and needs of just YOUR company. In these days of rapid changes in technology it is very difficult to keep up with the latest trends even in the field of your own activity, not to mention other industrial or foreign branches. And that is why we offer you our technical support based on our know-how and our experience. We hope that you - as well as our present clients - will also appreciate our assistance with solving problems regarding the separation of magnetic particles from your products, that we will help to protect your expensive machinery and that our solutions will make your production process even more fluent. If you are looking for a solution of a problem with separation or detection of ferromagnetic impurities in your goods, do not hesitate to contact us. We can help you.

Free magnet audit

Free magnet audit is an exceptional service thatSollau_serviceman.jpg

  • checks the function of the magnetic separator (if the tramp metal is effectively trapped)
  • examines if the magnetic separator fulfils its potential and meets application requirements
  • evaluates the effective pull, the status, the location and the cleanness of the applied magnets

During the audit, we do not only inspect your magnetic equipment, but we also

  • provide training on care and maintenance of magnetic separators
  • suggest the measures to be taken in order to improve the operating efficiency of the magnetic separation related to your products and materials
  • identify the key areas in your company where the application of magnetic separators could enhance the operating performance, reduce operating costs, purify the product or protect processing equipment from metal damages

Audits are conducted by SOLLAU specialists that - in co-operation with the client - develop an audit plan and determine priorities. During the audit, the auditor physically inspects and measures the effective strength of the magnetic separator. He also photographs and documents the state of the device. After the check is completed, the auditor issues a detailed report including the results of the effective strength findings. The inspection results are also important references for internal quality assurance and help analyse biological, chemical and physical hazards (HAACP) as well as ensure high quality production (QA).

 

Contact us

e-mail info@sollau.cz

Phone +420 576 013 873

SOLLAU s.r.o.
Hrivinuv Ujezd 212
763 07 Velky Orechov
Czech Republic

VAT ID: CZ29261759

Show in Google Maps...

Name and surname:
E-mail:
Phone / Mobile:
Country:
Note (Would you like to tell us anything or ask us about anything?):