Skip to content Skip to menu

Advantages of metal detector Quicktron 07 RH HyQ Clean

  • Immune to external electromagnetic interference
  • Gravity free-fall style detector to be installed in pipes with a diameter of 80 – 300 mm
  • Intuitive and easy operation
  • Low height and compact dimensions
  • Hygienic design for use in the food industry
  • Extremely accurate metal detection
  • Unmatched sensitivity – there can be captured a steel ball of 0,4 mm in the DN 100 pipeline
  • All-stainless steel detector
  • Minimal loss of good material

Metal detectors QUICKTRON 07 RH HyQ Clean for gravity

The detector is fully automatic, equipped with a high-speed reject flap that instantly diverts the contaminant from the product stream and minimizes the loss of a good product.

The highly sensitive QUICKTRON 07 RH HyQ Clean gravity free-fall style metal detector for the examination of free-falling bulk materials. The QUICKTRON 07 is a synonym for metal detectors with the highest detection accuracy and reliability. The detector coil has several layers of shielding and does not require a plastic sensor tube. This makes the detector immune to external electromagnetic interference, allowing for extremely accurate metal detection.

The QUICKTRON 07 RH HyQ Clean detector is easily integrated into existing installation thanks to its low overall height and compact dimensions.

This detector is fitted with a first-rate AMD 07 control unit with a range of advanced functions. The unit is equipped with a touch screen, so its operation is simple and intuitive.It enables permanent monitoring of electronic and mechanical parts. The mesuNET system allows remote access to the device. The control unit is a part of the detector but it can also be placed outside the detector.

We supply this metal separator for pipes with a diameter of 80 – 300 mm as standard. We can also offer a detector for pipes of other diameters and shapes (square, rectangular).

It is made of stainless steel with an emphasis on hygienic design. It meets the strictest hygiene requirements, it is easy to clean and resistant to most cleaning procedures. There are no dead spots where the material could settle or accumulate!

The hygienic design and extreme sensitivity make the QUICKTRON 07 RH HyQ Clean detector the absolute top among gravity free-fall style metal detectors is used to detect and reject metal contaminants from bulk materials gravitationally transported in pipelines.

Principle advantages of a gravity free-fall style metal detector

  • Metal detector for inspection of bulky material during free fall fulfilling the highest hygienic requirements at the same time.
  • All metal particles are detected and it is both off-shell particles and the ones in the form of inclusions in the end product.
  • Extremely exact and reliable detection of metals.
  • Resistant against electromagnetic disturbance.
  • Easy cleaning – fulfils the strictest hygienic requirements.
  • Compactness making the integration into already existing production plants and lines easier.

Principle advantages of a gravity free-fall style metal detector

  • Metal detector for inspection of bulky material during free fall. All metal particles are detected and it is both off-shell particles and the ones in the form of inclusions in the end product.
  • Extremely exact and reliable detection of metals.
  • Resistant and robust – favourable investment.
  • Versions with the ATEX certificate are available.
  • Compactness making the integration into already existing production plants and lines easier.

The QUICKTRON 07 RH HyQ Clean gravity free-fall style metal detector is:

  • Reliable – in process and detection
  • Fast – in response and cleaning
  • Conforming – in design and data management

Hygienic design

Easy disassembly – the reject unit can be dismantled in less than 1 minute and without tools!

Reject flapThe reject flap can also be easily and quickly dismantled and cleaned.

Optional equipment

The QUICKTRON 07 RH HyQ Clean detectors can be supplied with a wide range of additional equipment:

  • Signal units – beacon, buzzer, beacon with siren
  • MesuSET – operation of detector via laptop
  • MesuNET – network integration and remote maintenance
  • Air compressor
  • Compressed air tank

Special design

Do you have special requirements for a metal detector design? The most common requirements include:

  • Explosion proof versions
  • Units painted to customer specific color code

Materials employed

  • Frame – stainless steel (1.4301 / SS 304)
  • Detection coil - stainless steel (1.4301 / SS 304)
  • Control box - stainless steel (1.4301 / SS 304)
  • Sensor area – PE (polyethylene) antistatic food, FDA conforming
  • Connection flange - stainless steel (1.4301 / SS 304)
  • Reject flap - stainless steel (1.4301 / SS 304)

Dimensions

Dimensions of gravity free-fall style metal detector QUICKTRON 07 RH HyQ Clean

Dimensions of gravity free-fall style metal detector QUICKTRON 07 RH HyQ Clean

A1: (mm)A2/A3: (mm)B: (mm)C: (mm)D: (mm)E: (mm)F: (mm)G: (mm)H: (mm)
80 100 42 190 280 350 220 230 600
100 100 73 190 280 350 220 230 680
120 120 80 190 280 350 220 230 700
150 150 80 190 360 385 290 300 825
200 200 90 225 370 435 380 320 980

A: (mm)B: (mm)C: (mm)D: (mm)E: (mm)F1: (mm)F2: (mm)G: (mm)H: (mm)
250 125 255 450 500 345 370 490 1250
300 150 295 550 585 355 485 580 1600

We can supply units with different height, inside diameters, frames, etc. to meet your requirements.

We will ask you to specify the required modifications so that the offer can be elaborated exactly according to your requirement.

Sensitivity of a metal detector

The detector sensitivity depends on many parameters, such as the aperture diameter (the smaller the aperture, the higher the sensitivity), the material speed, the density of the product, its temperature, humidity, etc.

Maximum obtainable sensitivity can be established by testing your product sample in our laboratory.  We will perform these tests free of charge. Please contact us, we will discuss the test execution as well as the dispatch of your material samples.17.03.2022

Metal detector QUICKTRON 07 RH HyQ Clean sensitivity table

Model 80 100 120 150 200 250 300
Sensitivity – steel ball dia. (mm) 0,4 0,4 0,5 0,6 0,8 1,0 1,2

AMD 07 Control unit

A first-rate control unit is essential for the proper functioning of any detector. Our control unit is made with an emphasis on the high quality of workmanship and components.

AMD 07 Control unitThe result is a stable control unit with a wide range of functions (just to name a few):

  • Communication via Ethernet = unlimited flexibility
  • Compact control unit
  • Auto-balance including the suppression of interfering signals and automatic sensitivity calibration
  • Dynamic auto-tracking – maximum sensitivity in operation
  • Multi-filter system using digital filtration for maximum stability in harsh environments
  • Self-monitoring system ensures that all important components function properly
  • Narrow detection zone provides an accurate location of the metallic particle in the detection field allowing precise separation
  • Easy intuitive operation – essential for detector operation
  • 5.7" Color display
  • Product storage memory backup – for up to 500 products
  • Metal detector network and remote service - diagnostics, parameter change, SW update
  • USB data media – USB data connection is a standard equipment to store data, carry out easy SW update, upload additional files etc.

Scope of delivery

The delivery of QUICKTRON 07 RH HyQ Clean detectors includes:

  • Detection head
  • Reject unit including pneumatic components such as air pressure regulator, etc.
  • Control unit (= electronics mounted in a metal cabinet)
  • Connecting cables
  • Installation hardware
  • User manual
  • Power supply: 100 – 240 V AC, 50/60 Hz
  • Power consumption: max. 50 W
  • Type of protection: IP 66
  • Min. working temperature: - 10 °C
  • Max. working temperature: + 50 °C
  • Relative air humidity: 0 – 95 % (without condensation)
  • The conveying speed at which metals can be reliably detected: 1,5 – 6,0 m/s
  • Power cable: 1.8 m with plug
Top