Skip to content Skip to menu

Advantages of metal detector P-TRON 05 GM V1

  • Metal detector for pneumatic transport
  • Suitable for detecting metals in plastic granules
  • Detector for installation in horizontal and vertical pipes
  • ATEX design for potentially explosive atmospheres
  • Extremely fast reaction time under 0,05 s
  • Unmatched sensitivity – there can be captured metal particles of 0,6 mm
  • Pipe detector with an aperture diameter of 38 - 120 mm
  • No metal free zone required
  • Minimal loss of good material

Pipe metal detector P-TRON 05 GM V1

The cost-effective pipe metal detector P-TRON 05 GM V1 detector is used to detect and reject metal particles from vacuum-fed bulk materials. It is designed for installation into vertical and horizontal pipes. It is often used to detect metals in plastic material (granules, re-granulate, plastic flakes).

The detector is fully automatic, equipped with a high-speed reject flap that instantly diverts the detected contaminant from the product stream and minimizes the loss of a good product.

The main advantages of this metal detector include the low price (resulting in a very fast return on investment) and easy installation.

We supply this detector with an inlet opening of 38 – 80 mm as standard.

The control unit is very simple to operate, stable, and durable.

Principle advantages of a pipeline metal detector

  • Metal detector for compressed-air transport.
  • All metals both free and hidden in the material are detected and separated automatically.
  • Very exact and relible detection of metals.
  • Option to deliver a special design for abrasive materials or into an explosive ambient with the  atex certificate.

Principle of detector function

The metal detector of the P-TRON series is installed into a pipeline used for the vacuum transport of bulk materials. The inspected material passes through the reject assembly. If the material is contaminated with metal particles, the contaminant in the product stream alters the high frequency field generated by the search coil. The electronics evaluate this signal and generate an impulse for the solenoid valve and double actuating air cylinder of the reject assembly. The contaminant is instantly diverted from the good product stream assuring minimal good product loss. The reject flap then automatically returns to its normal position. The detector operation including the elimination of contaminants is fully automatic.

Thanks to the high-speed reject flap used, its operation is very fast and accurate, enabling minimization of good material loss.The reject time is adjustable.

Horizontal installation

Horizontal installation of metal detector P-TRON 05 GM V1

Vertical installation

Vertical installation of metal detector P-TRON 05 GM V1

The P-TRON 05 GM V1 pipeline metal detector is:

  • Reliable – in process and detection
  • Durable – in technology and performance
  • Fast – in response and cleaning

Optional equipment

The P-TRON 05 GM V1 detectors can be supplied with a wide range of additional equipment:

  • Signal units – beacon, buzzer
  • Reject counter
  • MesuSET – operation of detector via laptop
  • MesuNET – network integration and remote maintenance

Special design

Do you have special requirements regarding the metal detector design? The most common requirements include:

  • Integrated control unit
  • Units can be painted in customer specific colour code
  • Version for explosive atmospheres
  • Larger container for removed contaminants
  • Reject flap made from polished stainless steel

Contact us – we will elaborate a solution just for you.

Dimensions

P-TRON 05 GM V1 H – horizontal installation
Ø AB (mm)C (mm)D (mm)E (mm)G (mm)Ø H (mm)K (mm)L (mm)M (mm)Ø N (mmp
Size 1 38, 45, 50, 55, 60 270 340 1286 350 175 60 187 90 160 11,5
Size 2 60, 70, 75, 80 310 430 1410 350 175 89 187 98 160 11,5
Size 3 85, 100″, 120″ 430 / 280 / 280 669 1116 453 233 89 200 96 170 13
P-TRON 05 GM V1 V UP – vertikální instalace
ØAB (mm)C (mm)D (mm)E (mm)G (mm)Ø H (mm)K (mm)L (mm)M (mm)Ø N (mmp
Size 1 38, 45, 50, 55, 60 398 340 1500 350 175 60 473 246 160 11,5
Size 2 60, 70, 75, 80 480 430 1620 350 175 89 473 250 160 11,5
Size 3 85, 100″, 120″ 660 / 298 / 310 669 1630 453 233 89 538 324 170 13
P-TRON 05 GM V1 V DOWN – vertical installation
ØAB (mm)C (mm)D (mm)E (mm)G (mm)Ø H (mm)K (mm)L (mm)M (mm)Ø N (mmp
Size 1 38, 45, 50, 55, 60 398 340 1500 350 175 60 473 246 160 11,5
Size 2 60, 70, 75, 80 480 430 1620 350 175 89 473 250 160 11,5
Size 3 85, 100″, 120″ 660 / 298 / 310 669 1630 453 233 89 538 324 170 13

We can supply units with different height, inside diameters, frames, etc. to meet your requirements.

Contact us – we will prepare a solution just for you.

Sensitivity of a metal detector

The detector sensitivity depends on many parameters, such as the aperture diameter (the smaller the aperture, the higher the sensitivity), the material speed, the density of the product, its temperature, humidity, etc.

Maximum obtainable sensitivity can be established by testing your product sample in our laboratory.  We will perform these tests free of charge. Please contact us, we will discuss the test execution as well as the dispatch of your material samples.17.03.2022

Sensitivity diagram the detector P-TRON 05 GM V1

ModelP-TRON 05 GM V1 38P-TRON 05 GM V1 45P-TRON 05 GM V1 50P-TRON 05 GM V1 55P-TRON 05 GM V1 60P-TRON 05 GM V1 65P-TRON 05 GM V1 70P-TRON 05 GM V1 75P-TRON 05 GM V1 80P-TRON 05 GM V1 100P-TRON 05 GM V1 120
Aperture diameter (mm) 38 45 50 55 60 65 70 75 80 100 120
Fe ball (mm) 0,6 0,9 1,2
NonFe ball (mm) 0,6 1,0 1,2
SS ball (mm) 1,0 1,5 1,75

AMD 05 Control unit

A first-rate control unit is essential for the proper functioning of any detector. Our control unit is made with an emphasis on the high quality of workmanship and of the employed components.

AMD 05 Control unitThe result is a stable control unit with a wide range of functions (just to name a few):

  • Auto-balance including the suppression of interfering signals and automatic sensitivity calibration
  • Multi-filter system using digital filtration for maximum stability in harsh environments
  • Self-monitoring system ensures that all important components function properly
  • Touch screen control panel – modern design
  • Easy 4-button intuitive operation
  • 5-line LCD display
  • Product storage memory backup – for up to 500 products
  • Metal detector network and remote service - diagnostics, parameter change, SW update

Scope of delivery

The delivery of P-TRON 05 GM V1 detectors includes:

  • Detection head
  • Control unit (= electronics mounted in a metal cabinet)
  • Separation unit
  • Connecting cables
  • Installation hardware
  • Power supply: 100 – 240 V AC, 50/60 Hz
  • Power consumption: max. 50 W
  • Type of electrical protection: IP 54
  • Min. working temperature: - 10 °C
  • Max. working temperature: + 50 °C
  • Relative air humidity: 0 – 95 % (without condensation)
  • Transport speed: 0.5 – 30 m/sec
  • Required air pressure: 6 – 10 bar
  • Compressed air consumption during the separation: 0.2 l
  • Material: diameter: 0,5 – 8,0 mm
  • Power cable: 1.8 m with a plug
Top