Back to the main ECS separator page
EDDY CURRENT SEPARATORS FOR NON-FERROUS METALS
Four eddy current separator models for separating non-ferrous metals—from coarse fractions to the finest particles. Compare the parameters and choose the right model for your operation.
RANGE OVERVIEW
The RAM model has a concentric rotor for large metals. The ZEBU, BULL and BUFFALO models have an eccentric rotor that also recovers fine particles. They differ in the number of magnetic poles, equipment and price.
Highest capacity, lowest purchase price. For large non-ferrous metals.
Eccentric rotor and separation from 1 mm without features that do not affect the result.
On-the-fly rotor position adjustment, belt replacement within 6 minutes, remote management.
40 magnetic poles and recovery of the finest particles from 0.5 mm.
DETAILED COMPARISON
A complete comparison of technical parameters, controls, separation module and service across the entire model range.
| RAMECS-C | ZEBUECS-E | BULLECS-E | BUFFALOECS-E | |
|---|---|---|---|---|
| Key parameters | ||||
| Rotor type | Concentric | Eccentric | Eccentric | Eccentric |
| Min. particle size | from 50 mm | from 1 mm | from 1 mm | from 0.5 mm |
| Number of magnetic poles | 4 | 12 / 18 | 12 / 18 | 40 |
| Working width | 500–2000 mm | 500–2000 mm | 500–2000 mm | 500–1500 mm |
| Efficiency / capacity | High capacity | High | High | > 99 % |
| Operation and handling | ||||
| Rotor direction reversal | No | Yes | Yes | Yes |
| Rotor position adjustment | No | No | Yes | Yes |
| On-the-fly rotor position adjustment | No | No | Yes | Yes |
| Quick belt replacement within 6 minutes | No | No | Yes | Yes |
| Conveyor speed adjustment | Yes | Yes | Yes | Yes |
| Automatic belt tracking | Yes | Yes | Yes | Yes |
| Automatic lubrication | No | No | Yes | Yes |
| Controls | ||||
| Control method | Touchscreen PLC | Potentiometer | Touchscreen PLC | Touchscreen PLC |
| Remote management | Yes | No | Yes | Yes |
| Service and warranty | ||||
| Warranty | 1 year | 1 year | 3 years | 3 years |